Skip to main content
The Joint Research Centre: EU Science Hub
  • General publications

Acetic acid - 1a260, Sodium diacetate - 1a262, Calcium acetate (anhydrous and monohydrate) - 1a263

Acetic acid, Sodium diacetate (anhydrous and trihydrate), Calcium acetate

Details

Publication date
1 June 2021 (Last updated on: 8 October 2021)

Description

Upon the recent publication of new ring-trial validated methods EN 17294 and EN 17298 for the analysis of organic acids in feed additives, premixtures, feed materials, compound feed and water, the EURL, under the frame of article 5 of Regulation (EC) No 378/2005, considered appropriate to perform a new evaluation of the methods of analysis for official control of acetic acid, calcium acetate and sodium diacetate in the feed additives, premixtures, feedingstuffs and water, in the frame of the above-mentioned feed additive dossier. In this line, aiming to recommend the available analytical methods complying with the highest requirements as stated in Annex II of Regulation (EC) No 429/2008, the EURL also updates in this amendment the relevant methods for the metals (calcium and sodium).

For the determination of acetic acid, calcium acetate and sodium diacetate (as total acetic acid) in the feed additives, premixtures, feedingstuffs and water the EURL evaluated ring-trial validated EN 17294 method based on ion chromatography coupled to conductivity detection (IC-CD) [1]. This method is designed for the determination of formic, lactic, propionic, citric, fumaric, malic and acetic acids and their salts (as total individual acids) in feed additives, premixtures, feed materials, compound feed and water.

Based on the performance characteristics presented and the scope of the method in terms of matrices, the EURL recommends for official control the ring-trial validated EN 17294 method based on ion chromatography coupled to conductivity detection (IC-CD) for the determination of acetic acid, calcium acetate and sodium diacetate (as total acetic acid) in the feed additives, premixtures, feedingstuffs and water.

In addition, in the frame of a similar organic acid dossier, the EURL has evaluated and recommended for official control for the determination of total sodium and calcium in the feed additives the two ring-trial validated methods, namely (i) EN ISO 6869 based on atomic absorption spectrometry (AAS) and (ii) EN15510 based on inductively coupled plasma-atomic emission spectrometry (ICP-AES). These recommendations are also valid in the frame of this addendum.

Recommended Method

as of:

Commission Implementing Regulation (EU) 2022/415

For the determination of acetic acid, sodium diacetate and calcium acetate as total acetic acid in the feed additives, premixtures and feedingstuffs:

Ion Chromatography with Conductivity Detection, IC-CD (EN 17294)

For the determination of sodium and calcium in the feed additives:

EN ISO 6869: atomic absorption spectrometry (AAS) or

EN 15510: inductively coupled plasma- atomic emission spectrometry (ICP-AES)

Files

  • 1 JULY 2021
final-addendum_acetic_acid.pdf