Skip to main content
EU Science Hub
Call for proposals

Call for proposals: FCTEST, Fuel cells and electrolyser testing facilities

The Fuel Cell and Electrolyser Testing facility in Petten, the Netherlands was established to support developments in Regulation, Codes and Standards through the validation of testing procedures and measurement methodologies for the performance...

Details

Status
N/A
Reference
2019-1-MD-FCTEST
Publication date
2 February 2022 in Petten, The Netherlands
Deadline model
Permanent

Description

The Fuel cells and electrolyser testing facilities (FCTEST) laboratory is situated at the Joint Research Centre of Petten (The Netherlands). It was established to support developments in Regulation, Codes and Standards through the validation of testing procedures and measurement methodologies for the performance assessment of fuel cells.

It is also used in the Fuel Cell and Hydrogen Joint Technology Initiative for pre-normative research and harmonization of fuel cell and electrolyser test protocols and testing methodologies and their experimental validation.

The facility allows testing of low and high temperature polymer electrolyte membrane (PEM) fuel cell stacks, components and entire systems for up to 100 kW electrical power in stationary and transport applications. In addition, electrolyser cells and high temperature solid oxide cells and stacks can be tested in fuel cell and electrolyser mode.

The facility also has capabilities for testing under simulated environmental conditions including temperature, relative ambient humidity (up to 95 %), and vibrations and shocks.

fctest_thum.jpg

Definition and conditions of access

Access to the research infrastructure is granted on the basis of Access Units.

For FCTEST, the Access Unit corresponds to a ' Equipment day' made available for the experimental activities, and corresponds to a minimum of 8 hours of testing per day for any of the equipment in the following list:

  1. 100 kW low temperature fuel cell test station (FCATS) with 120 kVA DC/AC load inverter and 72 kW DC load;
  2. 500 W high temperature electrolysis & fuel cell test station including furnace and EIS equipment for single cell & short stack testing;
  3. 5 kW high temperature fuel cell test station including EIS equipment for short stack and mini-system testing;
  4. 3 kW and 500 W low temperature fuel cell test station for single cell & short stack testing;
  5. 1.5 kW low temperature electrolysis & fuel cell test station for single cell testing;
  6. Programmable modular 4x 24 kW DC load (sink) / 4x 10 kW power supply (source) test bench for power device testing;
  7. Walk-in environmental chamber (climate chamber) with control of temperature (-40°C to +60°C) & relative ambient air humidity (5% to 95%) for environmental testing;
  8. Multi-axial vibration table (shaker table) with a 500 kg pay load capability for frequencies up to 250 Hz housed in the climate chamber for mechanical shock and vibration testing.
  • Estimated costs excluding consumables and expenses:
    • Research infrastructure operated by JRC staff: 550 € / Equipment Day**
    • Research infrastructure operated by users: Not possible

*there is no average, depends on the project proposals and availability of the research infrastructure.

** the cost of an Equipment Day is factored by the following amounts for the following list of equipment:

  • 1.2 for equipment a)
  • 0.8 for equipment b) through e)
  • 0.4 for equipment f)
  • 1.6 for equipment g) and h)

Allocation of intellectual property rights:

Intellectual property rights are allocated according to Paragraph III of Annex 1: Intellectual Property Rights

Eligibility criteria

How to apply

The proposal must be prepared using the Market-driven Proposal Submission Form.
During preparation of the proposal, applicants are encouraged to:

  • Contact the research infrastructure at JRC-ENERGY-STORAGEatec [dot] europa [dot] eu (JRC-ENERGY-STORAGE[at]ec[dot]europa[dot]eu) to assess feasibility aspects related to the capacity of the research infrastructure.

The proposal should be submitted to JRC-RI-OPEN-ACCESSatec [dot] europa [dot] eu (JRC-RI-OPEN-ACCESS[at]ec[dot]europa[dot]eu).

In addition, and before the closing date of the call, the Lead User shall complete the FCTEST List of equipment Form and send it to JRC-ENERGY-STORAGEatec [dot] europa [dot] eu (JRC-ENERGY-STORAGE[at]ec[dot]europa[dot]eu).

The JRC will only evaluate proposals that are complete and comply with the instructions in the proposal submission form.

Selection criteria

Proposal will be evaluated in accordance to the following selection criteria:

  • Scientific implementation (40 points)
  • Access to SMEs and new Users (25 points)
  • Strategic relevance to the JRC (20 points)
  • Strategic importance for Europe (15 points)

Related Content

Selection Criteria Background Documents

The 6 Priorities of the European Commission

JRC Thematic Focus Areas